Specifications

6.1 Wireless handsets
Wireless handsets are compatible with the Ray63 and
Ray73 VHF DSC radios. Using the optional wireless
accessories you can create up to 2 fully functional
wireless handset stations.
As a minimum the Wireless hub (A80540), Wireless
hub adaptor cable (R70739) and Wireless handset
(A80544) are required to create a wireless handset
station. Additionally a Wireless speaker (A80543) can
be connected to each Wireless handset.
After connecting your Wireless hub to the Second
station connector on the rear of your Ray63 / Ray73
Base station, the process for setting up a wireless
handset station should be:
1. Fully charge the Wireless handset.
2. Connect the Wireless handset to the Wireless hub.
3. If required, connect a Wireless speaker to the
Wireless handset.
Warning: Retain a wired
handset station
A wired handset station should always be
connected and available.
Wireless handset charging
When inserted into the wireless handset charging
holster the wireless handset will be charged using
inductive charging.
Attention
Ensure your wireless handset is fully charged before use.
Charging
Whilst charging a battery symbol will
gradually fill up
.
Charged
When fully charged the battery symbol
will be full.
With the Handset powered on the battery symbol will be
displayed in the status bar at the top of the screen.
With the handset powered off the battery symbol is
displayed fullscreen.
6.2 Connecting a wireless
handset to the hub
Wireless handsets must be connected to the radio via
a Wireless hub.
When the Wireless handset is powered on for the first
time you will need to connect it to a Wireless hub.
1. Select Wireless hub.
The handset will display a list of wireless devices in
range.
2. Select your Wireless hub from the list.
The Wireless hub’s default name is ‘RM’ followed by
the 6 digit part number and 7 digit serial number
of the radio that the Wireless hub is connected to
(e.g.: Radio part number: E70625 and serial number:
1070828 = Hub name: RM E70625 107828).
3. Enter the password.
You can check the Wireless hub’s password using
a Wired handset by selecting:
Menu > Set-up >
Wireless set-up > Wireless hub set-up > Password.
The handset will now connect to the Wireless hub.
4. Select
OK.
58
81381-3-en-US_A5_PRINT.pdf 58 5/4/2020 3:26:32 PM