User's Manual
Table Of Contents
- 1 Disclaimers
- 2 Safety information
- 3 Notice to user
- 4 Customer help
- 5 Quick Start Guide
- 6 List of accessories and services
- 7 Description
- 8 Operation
- 8.1 Charging the battery
- 8.2 Turning on and turning off the camera
- 8.3 Saving an image
- 8.4 Recalling an image
- 8.5 Deleting an image
- 8.6 Deleting all images
- 8.7 Measuring a temperature using a spotmeter
- 8.8 Measuring the hottest temperature within an area
- 8.9 Measuring the coldest temperature within an area
- 8.10 Hiding measurement tools
- 8.11 Changing the color palette
- 8.12 Working with color alarms
- 8.13 Changing image mode
- 8.14 Changing the temperature scale mode
- 8.15 Setting the emissivity as a surface property
- 8.16 Setting the emissivity as a custom material
- 8.17 Changing the emissivity as a custom value
- 8.18 Changing the reflected apparent temperature
- 8.19 Changing the distance between the object and the camera
- 8.20 Performing a non-uniformity correction (NUC)
- 8.21 Configuring Wi-Fi
- 8.22 Changing the settings
- 8.23 Updating the camera
- 9 Technical data
- 10 Mechanical drawings
- 11 CE Declaration of conformity
- 12 Cleaning the camera
- 13 Application examples
- 14 About FLIR Systems
- 15 Definitions and laws
- 16 Thermographic measurement techniques
- 17 History of infrared technology
- 18 Theory of thermography
- 19 The measurement formula
- 20 Emissivity tables
Operation
8
8.1 Charging the battery
WARNING
For equipment with plugs:
Make sure that you install the socket-outlet near the equipment and that it is easy to get access to.
8.1.1 Charging the battery using the FLIR power supply
Follow this procedure:
1. Connect the power supply to a wall outlet.
2. Connect the power supply cable to the USB connector on the camera.
NOTE
The charging time for a fully depleted battery is 2 hours.
8.1.2 Charging the battery using the FLIR stand-alone battery charger.
Follow this procedure:
1. Connect the stand-alone battery charger to a wall outlet.
2. Remove the battery from the camera.
3. Put the battery into the stand-alone battery charger.
NOTE
• The charging time for a fully depleted battery is 2 hours.
• The battery is being charged when the blue LED is flashing.
• The battery is fully charged when the blue LED is continuous.
8.1.3 Charging the battery using a USB cable
Follow this procedure:
1. Connect the camera to a computer using a USB cable.
NOTE
• To charge the camera, the computer must be turned on.
• Charging the camera using a USB cable connected to a computer takes considerably longer than
using the FLIR power supply or the FLIR stand-alone battery charger.
#T559828; r. AK/40423/40423; en-US
16