User's Manual Part 1
Table Of Contents
- 1 Disclaimers
- 2 Safety information
- 3 Notice to user
- 4 Customer help
- 5 Quick start guide
- 6 List of accessories and services
- 7 A note about ergonomics
- 8 Camera parts
- 9 Screen elements
- 10 Navigating the menu system
- 11 Pairing Bluetooth devices
- 12 Configuring Wi-Fi
- 13 Handling the camera
- 13.1 Charging the battery
- 13.2 Turning on the camera
- 13.3 Turning off the camera
- 13.4 Adjusting the viewfinder’s dioptric correction
- 13.5 Adjusting the angle of the lens
- 13.6 Adjusting the infrared camera focus manually
- 13.7 Autofocusing the infrared camera
- 13.8 Continuous autofocus
- 13.9 Operating the laser pointer
- 13.10 Using the digital zoom function
- 13.11 Changing lenses
- 13.12 Calibrating the compass
- 13.13 Changing the viewfinder eyecup
- 13.14 Using the camera lamp as a flash
- 14 Working with images
Handling the camera13
7. Carefully push the lens into position.
8. Rotate the lens 30° degrees clockwise.
13.12 Calibrating the compass
13.12.1 Procedure
Follow this procedure:
1. Push the joystick to display the menu system.
2. Use the joystick to go to
(Settings).
3. Push the joystick to display the Settings menu.
4. Select Device settings and push the joystick.
5. Select GPS & compass and push the joystick.
6. Select Compass. If the Compass check box is unchecked, push the joystick to ena-
ble the compass.
7. Select Calibrate compass and push the joystick. Follow the on-screen instructions.
Note You have to rotate the camera slowly.
13.13 Changing the viewfinder eyecup
CAUTION
Applicability: Cameras with a viewfinder.
Make sure that the beams from the intensive energy sources do not go into the viewfinder. The beams
can cause damage to the camera. This includes the devices that emit laser radiation, or the sun.
Note This item is dependent on the camera model.
#T559880; r. AL/45866/46124; en-US
31