User's Manual Part 1
Table Of Contents
- 1 Disclaimers
- 2 Safety information
- 3 Notice to user
- 4 Customer help
- 5 Quick start guide
- 6 List of accessories and services
- 7 A note about ergonomics
- 8 Camera parts
- 9 Screen elements
- 10 Navigating the menu system
- 11 Pairing Bluetooth devices
- 12 Configuring Wi-Fi
- 13 Handling the camera
- 13.1 Charging the battery
- 13.2 Turning on the camera
- 13.3 Turning off the camera
- 13.4 Adjusting the viewfinder’s dioptric correction
- 13.5 Adjusting the angle of the lens
- 13.6 Adjusting the infrared camera focus manually
- 13.7 Autofocusing the infrared camera
- 13.8 Continuous autofocus
- 13.9 Operating the laser pointer
- 13.10 Using the digital zoom function
- 13.11 Changing lenses
- 13.12 Calibrating the compass
- 13.13 Changing the viewfinder eyecup
- 13.14 Using the camera lamp as a flash
- 14 Working with images
Working with images14
14.2 Previewing an image
14.2.1 General
You can preview an image before you save it. This enables you to see if the image con-
tains the information you want before you save it. You can also adjust and edit the image.
Note The camera must be configured to display a preview image before saving. Select
(Settings) > Save options > Preview image before saving = On.
14.2.2 Procedure
Follow this procedure:
1. To preview an image, push the Autofocus/Save button fully down. This displays the
preview.
2. Manual image adjust mode is now active, and the status icon
is displayed. For
image adjustment instructions, see 14.5 Adjusting an infrared image, page 36.
3. To edit the image, push the joystick. This displays a context menu. For editing instruc-
tions, see 14.4 Editing a saved image, page 35.
4. Do one of the following:
• To save the image, push the Autofocus/Save button fully down.
• To exit preview mode without saving, push the Back button
.
14.3 Opening a saved image
14.3.1 General
When you save an image, the image file is stored on the memory card. To display the im-
age again, open it from the image archive.
14.3.2 Procedure
Follow this procedure:
1. Push the Image archive button
.
2. Move the joystick up/down or left/right to select the image you want to view.
3. Push the joystick. This will display the image at full size.
4.
Do one or more of the following:
• To switch between an infrared image and a visual image, move the joystick up/
down.
• To view the previous/next image, move the joystick left/right.
• To edit the image, add annotations, display information, or delete the image, push
the joystick. This displays a context menu.
• To return to the image archive overview, push the Back button
.
14.4 Editing a saved image
14.4.1 General
You can edit a saved image. You can also edit an image in preview mode.
#T559880; r. AL/45866/46124; en-US
35