User Manual

Warnings & Cautions
2
• (Applies only to Flir A3xx f/A3xx pt series cameras.)
• Except as described in this manual, do not open the Flir A3xx pt/A3xx f series
camera for any reason. Disassembly of the camera (including removal of the cov-
er) can cause permanent damage and will void the warranty.
• Do not to leave fingerprints on the Flir A3xx pt/A3xx f series camera’s infrared
optics.
• The Flir A3xx pt/A3xx f series camera requires a power supply of 24 VDC. Operat-
ing the camera outside of the specified input voltage range or the specified operat-
ing temperature range can cause permanent damage.
• When lifting the Flir A3xx pt series camera use the camera body and base, not the
tubes.
• (Applies only to Flir GF309 cameras.) CAUTION: The exceptionally wide temperature
range of the Flir GF309 infrared camera is designed for performing highly accurate
electrical and mechanical inspections and can also “see through flames” for inspecting
gas-fired furnaces, chemical heaters and coal-fired boilers. IN ORDER TO DERIVE
ACCURATE TEMPERATURE MEASUREMENTS IN THESE ENVIRONMENTS THE
GF309 OPERATOR MUST HAVE A STRONG UNDERSTANDING OF RADIOMETRIC
FUNDAMENTALS AS WELL AS THE PRODUCTS AND CONDITIONS OF COMBUS-
TION THAT IMPACT REMOTE TEMPERATURE MEASUREMENT. The Infrared Train-
ing Center (itc) offers a wide range of world class infrared training for thermography
professionals including GF309 operators. For more information about obtaining the
training and certification you require, contact your Flir sales representative or itc at
www.infraredtraining.com.
#T559772; r.5948/5948; en-US
7