User Manual

Camera parts
8
8. A/M button: This button has two main functions:
1. Push to switch between automatic and manual adjustment modes. The manual
adjustment modes that can be selected are the following:
• Manual: Using this mode, the top and bottom temperature levels in the scale
can be changed simultaneously, by pushing the joystick up/down. The tem-
perature span can be changed by pushing the joystick left/right.
• Manual min.: Using this mode, the bottom temperature level in the scale can
be changed by pushing the joystick up/down, while the top temperature level
remains fixed.
• Manual max.: Using this mode, the top temperature level in the scale can be
changed by pushing the joystick up/down, while the bottom temperature level
remains fixed.
2. Push and hold the button until you hear a clicking sound to autoadjust the image.
9. Archive button: Push to open/close the image gallery.
10. On/Off button: Push to turn on/turn off the camera. Allow 45 seconds for the startup
sequence.
11. Hand strap.
8.2 Front view
8.2.1 Figure
8.2.2 Explanation
1. Laser pointer button: Push to activate the laser pointer.
2. This button has two main functions:
1. Preview/Save: Push the button fully down to save an infrared image and a digital
photo simultaneously.
Note
The behavior of this button can be changed under Settings to one of the following:
• Preview/Save.
• Save directly (default).
• Always preview.
2. Autofocus: Push the button halfway down to autofocus the camera.
#T559772; r.5948/5948; en-US
16