User Manual

Working with measurement tools and isotherms19
• An isotherm color that is displayed when the camera detects what may be an insulation
deficiency in a wall.
19.3.2 Setting up a high-temperature isotherm
Follow this procedure:
1. Push the Menu/Back button.
2. On the main menu, go to the Tools button
and push the joystick.
3. On the Tools menu, select Add isotherm
and push the joystick.
4. Select Above.
5. Move the joystick up/down to set the temperature at which you want the isotherm color
to be displayed. The screen will now display the isotherm color when the temperature
exceeds the set temperature level.
19.3.3 Setting up a low-temperature isotherm
Follow this procedure:
1. Push the Menu/Back button.
2. On the main menu, go to the Tools button
and push the joystick.
3. On the Tools menu, select Add isotherm
and push the joystick.
4. Select Below.
5. Move the joystick up/down to set the temperature at which you want the isotherm color
to be displayed. The screen will now display the isotherm color when the temperature
falls below the set temperature level.
19.3.4 Setting up an interval isotherm
Follow this procedure:
1. Push the Menu/Back button.
2. On the main menu, go to the Tools button
and push the joystick.
3. On the Tools menu, select Add isotherm
and push the joystick.
4. Select Interval.
5. Do one of the following:
• Move the joystick up/down to set the temperature levels between which you want
the isotherm color to be displayed.
• Move the joystick left/right to set the temperature span within which you want the
isotherm color to be displayed.
The screen will now display the isotherm color when the temperature is between the
set temperature levels.
19.3.5 Setting up a humidity isotherm
Follow this procedure:
1. Push the Menu/Back button.
2. On the main menu, go to the Tools button
and push the joystick.
3. On the Tools menu, select Add isotherm
and push the joystick.
4. Select Humidity.
#T559772; r.5948/5948; en-US
48