Maintenance Manual

910-0001-00-INS -R05 FLIR Proprietary Information Page 45 of 53

Information contained in this document pertains to a Canadian origin product that is controlled as "dual use" by the Canadian

government. However, when in the United States or possessed by a US person, it may be considered a defense article from the US Government's

perspective. US government authorization may be required for re-transfer to a foreign person. If you have any questions, please contact FLIR's

Global Trade Compliance group at exportquestions@flir.com .

6 TROUBLESHOOTING

The following tables cover the Built-In Test (BIT) error codes and their description and solutions for

resolving problems.

Note

In the event that any of these error codes are reported, follow the procedure below.

Step 1 Try re-initializing the system.

Step 2 If the error persists, gather the following information:

• Physical installation

• Network topology

• Software version

• Radar serial number

• Conditions under which the error occurred

• Any relevant application/system logs

Step 3 Contact Customer Support.

Error Code format: <Failure Category> . <Sub-Assembly code> <number>

Failure