Maintenance Manual

910-0001-00-INS -R05 FLIR Proprietary Information Page 5 of 53
Information contained in this document pertains to a Canadian origin product that is controlled as "dual use" by the Canadian
government. However, when in the United States or possessed by a US person, it may be considered a defense article from the US Government's
perspective. US government authorization may be required for re-transfer to a foreign person. If you have any questions, please contact FLIR's
Global Trade Compliance group at [e-mail] .
The following symbols are used throughout this document:
Caution!
The CAUTION symbol is used to alert the reader to situations where a hazard to personnel safety may
arise.
WARNING!
The WARNING symbol is used to alert the reader to situations where equipment damage is imminent
if a recommended process is not followed or alert the reader of a process that will alter or reset
current configuration of a specific setup.
DANGER!
The DANGER symbol is used to alert the reader to situations where a hazard to personnel may result
in serious injury possibly leading to death.
Disclaimer!
Disclaimers provide a means of specifying limitations or other requirements on equipment.
Note
Notes comprise additional information to assist the reader in the use or understanding of the
equipment or subject.