Quick Installation Guide
Table Of Contents
- 1 Quick Install Guide
- 1.1 Check Contents
- 1.2 Select a Location
- 1.3 Connect the Camera
- 1.4 Configure for Networking
- 1.5 Mount the Camera
- 1.6 Connect the Camera
- 1.7 Aim the Camera
- 1.8 Check the Boresight
- 1.9 Configure the Analytics
- 1.10 Attach the Camera to a Supported VMS
- 1.11 Camera Dimensions
- 1.12 Register the Product
- 1.13 Contact Information
427-0102-00-28 Triton FH-Series QIG Rev 110
November 2021
This document does not contain any export-controlled information.
10 Attach the Camera to a Supported VMS
After you have mounted the camera and discovered or defined its IP address,
attach the camera to a supported VMS using its discovery/attach procedure.
11 Camera Dimensions
The Triton FH-Series camera’s dimensions are:
12 Register the Product
Register the product at https://customer.flir.com.
For warranty information, see https://www.flir.com/support-
center/warranty/security/flir-security-product-warranties/.
13 Contact Information
Americas
6769 Hollister Avenue
Goleta, CA 93117
27700 SW Parkway Ave.
Wilsonville, OR 97070
Support: https://support.flir.com/