Quick Installation Guide

427-0300-01-10 Rev 130
June 2021
This document does not contain any export-controlled information.
To configure the camera for networking using the camera’s web page:
a. Open the camera’s web page by double-clicking the camera in the DNA
Discover List or by typing the camera’s IP address in a web browser’s address
bar. The camera's web page supports Google Chrome
®
and other popular web
browsers.
b. On the login screen, type admin
for the user name and the
password for the admin user
(default: admin).
c. When logging in to the camera for the first time or for the first time after
performing a factory default, specify a new password for the admin user.
Note
Use a strong password consisting of at least 12 characters and
at least one uppercase letter, one lowercase letter, and one
number. Passwords can include the following special
characters: |@#~!$&<>+_-.,*?= .
Log back in with the new password.
The camera's View Settings Home Page opens.
d. Click System Settings.
Make sure the Network page appears.