User Guide

This document does not contain any export-controlled information.
Operation
36
427-0300-00-12 - Revision 110 - May 2021
3.7 PTZ Page
Use the PTZ page to:
· Move the camera left, right, up, or down (pan and tilt)
· Define the pan and tilt speed, between 1x-10x
· Zoom in and out—click once or click and hold for continuous zoom
· Go to the camera's home position
· Set the camera's current position as its home position
· Define preset positions:
a. Under Preset Position, click Set
Preset.
b. Select a preset index number from
1-128. Selecting an index number
currently associated with a preset
position overwrites the existing
preset position.
c. Specify a unique, descriptive name
for the preset position. You can use
alphanumeric characters,
underscores (_), or dashes (-).
d. Click Set. The camera adds the
current position as a preset.
Preset positions are relative to the camera's orientation, which is defined on the Georeference Page. If
the camera's orientation changes and presets have been defined, redefine them with the new
orientation setting.
· Move the camera to a preset position, edit a preset name, or delete a preset:
Under Preset Position, click Presets.
The list of presets appears, in
ascending index number order.