User Guide

427-1065-00-12 Revision 130 November 2019 21
This document does not contain any export-controlled information.
Basic Operation and Configuration
Step 7 Using the Browse and Upload buttons, upload the Private Key and enter the Private
Key Password associated with the identity. The Private Key Password field can be left
blank if a password is not required.
If uploading a PKCS #8 file, the private key must be a valid PKCS #8 file.
A typical key has a “*.per” file extension.
If uploading a PKCS #12 file, the private key must be a valid PKCS #12 file.
A typical key has a “*.p12” or “*.pfx” file extension.
Step 8 Click Save and then Restart Network to save and implement the configuration.
To configure IEEE 801.1x authentication using PEAP MSCHAPv2
Step 1 On the LAN Settings page, scroll down to 802.1X Security.
Step 2 Check Use 802.1x security.
Step 3 From the Authentication drop-down menu, select PEAP(MSCHAPv2).
Step 4 In the Identity text box, enter the name associated with the client certificate.
Step 5 Use the Browse and Upload buttons to upload the associated CA Certificate from the
server provided by the network administrator. Typical file extensions will be *.cer, *.crt, or
*.der.
Step 6 In the Anonymous Identity text box, enter the Anonymous Identity if required.
Step 7 In the Password text box, enter the password associated with the Identity.
Step 8 Click Save and then Restart Network to save and implement the configuration.