User Guide

427-1065-00-12 Revision 130 November 2019 22
This document does not contain any export-controlled information.
Basic Operation and Configuration
Services Menu
Date and Time: The Date and Time settings page is used to configure the date and time settings.
The date, time, and time zone can be obtained from an NTP server, or can be entered manually. If
NTP mode is selected, the NTP server information can be entered.
Note
Set the date and time parameters, then select the Save button at the bottom of the page. After
saving the settings, reboot the system. Refer to Server Status, pg. 24.
The Nexus server must be stopped before changes can be saved.
Toggle Server (Stop/Start)