User Guide

427-1065-00-12 Revision 130 November 2019 51
This document does not contain any export-controlled information.
Advanced Configuration
is always the same for the alarms coming from the FB-Series ID camera itself, and only the source
type changes (Video Analytics or GPIO Input).
Video Analytics Alarm to Email: Shown at the right is an
example of an alarm rule that causes an email notification
(with a snapshot image) to be sent when a motion alarm
occurs in Analytics Region 0 or Region 1 (Area or Tripwire).
Refer to Creating Analytics Regions, pg. 40).
The Alarm Source Device Type is set to Video Analytics
with Alarm Id set to “1” corresponding to Analytics Area 1.
The Send Notification action uses a Msg System and a
Notification List that are set up in the Services menu (refer to
Services Menu, pg. 22). The email includes alarm
information, including the Area ID and if it is a human or
vehicle alarm. When an email is sent, the Alarm Manager
can attach a snapshot from the camera to the email. In
Attach Image File, All Non Radiometric is selected for the
type of image since the alarm type is Analytics.
FB-Series ID Options:
Video Analytics and
GPIO
Indicates the
alarm comes
from the camera
itself, rather than
another device
on the network.
Enable each alarm rule