User Guide

427-1065-00-12 Revision 130 November 2019 9
This document does not contain any export-controlled information.
Camera Installation
1.4 Camera Connections
Refer to Table 1-1 for a description of these camera connections.
1.4.1 Bench Testing
Note
Connect the power, Ethernet, and video, and confirm that the video can be displayed on a monitor
when the power is turned on. For configuration and basic setup information using the on-board web
server, refer to Camera Bench Test, pg. 14 for specific details.
Table 1-1: FB-Series Camera Connections
Connection Purpose
1 BNC Analog video
2 Green barrel not supported
3
Purple D-
not supported
Grey D+
4 Pink barrel not supported
5 Ethernet PoE power, communications, IP video stream
6 5-pin plug General purpose I/O
7 2-pin plug Vac or Vdc power
If the camera is to be mounted on a pole or tower or other hard-to-reach location, connect and
operate the camera as a bench test prior to mounting the camera in its final location.
1
7
6
52 3 4