Information

Optional Accessories
General description
P/N: 55901-0102
• Quickly indicates the moisture content of materials with Pinless technology without damaging the surface; Remote
© 2012, FLIR Systems, Inc.
Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length)
All rights reserved worldwide.
• Manually store/recall up to 20 labeled readings
• Works on multiple wood types and other building materials
• Easy to read, large dual display with automatic backlight feature
• Simultaneously displays moisture value of wood or material being tested, Air Temperature, IR Temperature, or
Humidity
• Pinless measurement depth to 0.75" (19mm) below the surface
• Programmable high/low Moisture and Humidity alarms
• Designed with a patented IR circuit to measure non-contact surface temperature; 8:1 distance to spot ratio with 0.95
fixed emissivity
• Built-in Humidity/Temperature probe measures Relative Humidity, Air Temperature plus Grains Per Pound
(GPP)/(g/kg), Dew Point (DP), Vapor Pressure, and condensation point
• Automatic calculation of differential Temperature (IR - DP) to determine condensation point
• Fast Analog Bargraph
• Min/Max and Data Hold
• Auto power off and low battery indication
• Complete with pin moisture probe with cable, 9V battery and case
v1.0
19250-100; IR Window 2 in., North America
General description
This device is a viewport which consist of a crystal "glass" window, mounted in an aluminum frame. The glass is
specially formulated to allow transmission of infrared light to allow use of infrared thermal sensing equipment without
opening the enclosure. This device is intended for installation in doors or walls of electrical enclosures without
compromising the integrity of the enclosure.
Technical data
Voltage Any range
Environment Indoor/outdoor type 4/12
Operating temperature range Maximum: 260°C (500°F)
Storage temperature range Optics, maximum: 1357°C (2474°F)
Size (L × W × H) 25.5 × 73 × 86 mm (1.0 × 2.87 × 3.36 in.)
Viewing aperture diameter 45 mm (1.77 in.)
Material Optics: CaF2 (Calcium Fluoride Crystal)
Body: Anodized aluminum
Hardware: steel
Comments to physical data Required hole diameter, nominal: 60.3 mm (2.375 in.)
Greenlee Punch: 76BB
Maximum pullout strength: 658 kg (1450 lb.)
Waveband Broadband IR: short-, mid-, and longwave
Visible light spectrum Yes
Certification UL, IP67, NEMA Type 4/12
Scope of delivery
• IR window
• Case
• Mounting instruction
• Additional safety screw
v1.03
Page 18 (of 31) http://www.flir.com
55901-0102_en_51.xml, ver. 1.12