Product Manual

5 Operation
2. Once powered on, press the power button to toggle between High-sensitivity
mode and Normal mode.
Note
Test on a known live circuit before testing on an uncertain circuit.
• In Normal mode, the status indicator illuminates a solid green color.
• In High-sensitivity mode, the status indicator illuminates a solid amber
color through the square.
3. Hold the AC voltage sensor very close to the voltage source.
4. If voltage is present, the meter vibrates and the alarm indicator flashes.
• In Normal mode, the alarm indicator flashes red.
• In High-sensitivity mode, the alarm indicator flashes an amber color.
5. To switch off the meter, press and hold down the power button for at least 2
seconds. The status LED and the tip light turn off.
5.3 Work light
To turn the work light on or off, press and hold the work light button for 2 seconds.
5.4 Indication of low battery level
When the battery voltage falls below 2.4 V DC, the amber status LED starts flash-
ing. After 1 minute of flashing, the meter automatically turns off.
5.5 Auto power off
When using the meter in Normal mode or High sensitivity mode, the meter turns
off after 3 minutes of inactivity. Press the power button to prevent the meter from
turning off. The auto power off time-out is then reset.
The work light turns off after 30 minutes. This can not be prevented by pressing
any button.
#T559851; r. AD/ 9134/9134; en-US 9