Instruction Manual

Installation
5
5.1 Installation Tips & Warnings
WARNING
Make sure to install the camera in a location that can support the camera weight. See 5.2
Installation (Indoor / Outdoor), page 6 for complete installation instructions.
• Camera is rated for outdoor use.
• It is recommended to install the camera as high up as possible to get the
best possible image.
• To extend the length of the cable, see 4.1 Extension Cables, page 5.
• Mount the camera where the lens is away from direct and intense sunlight.
• Plan your cable wiring so that it does not interfere with power lines or tele-
phone lines.
• Ensure you adhere to local building codes.
• Ensure that the camera wiring is not exposed or easily cut.
• Mount the camera in an area that is visible but out of reach.
NOTE
This camera includes all components required for wall mounting. For information on avail-
able mounting accessories, see the FLIR Camera Mounts Matrix on
www.flirsecurity.com/pro.
5.2 Installation (Indoor / Outdoor)
CAUTION
• Make sure to disconnect the power adapter before installing the camera. Camera will
begin moving immediately when power adapter is connected.
• Make sure to install the camera in a location that can support the camera weight.
#LX400046; r. 2.0/22386/22410; en-US
6