Instruction Manual

Controlling the PTZ Camera

with a DVR

You can connect the PTZ camera to a DVR to control the camera’s movement.

FLIR MPX PTZ cameras can accept PTZ commands directly through the co-

axial video cable. There is no need to run RS–485 wiring to use MPX PTZ

cameras.

NOTE

• The following instructions are based on the M3100 Series DVR. See your MPX DVR’s

user manual for instructions on controlling the PTZ camera with your DVR.

• For the latest list of compatible DVRs, please visit www.flirsecurity.com/pro.

To connect the PTZ camera to a DVR:

1. Connect the camera video cable to one of the Video IN ports on the

system.

2. Right-click and click Main Menu. Enter the system user name (default:

admin) and password (default: 000000) if prompted.

3. Click

>Setting>Pan/Tilt/Zoom.

4. Under Channel, select the channel your PTZ camera is connected to.

5. Under Control Mode, select HDCVI.

6. Under Protocol, select DH-SDI.

7. Click OK. You can now control your PTZ camera using the system.

#LX400046; r. 2.0/22386/22410; en-US