Instruction Manual

On-Screen Display (OSD) Menu
7
7.2.1 System Settings
SYSTEM
INFORMATION
ADDR Displays the camera address.
BR Displays the camera baud rate.
PARITY Displays the communication parity.
PTZ VER Displays the PTZ firmware version.
CAM VER Displays the camera firmware
version.
ADDR
INFORMATION
ADDR TYPE
• HARD
• SOFT
ADDR-HARD 1–255
ADDR-SOFT
0–255
SET NORTH Set the current viewing angle as the benchmark angle for the
camera.
LANGUAGE Set the language for the OSD menu.
FACTORY DEFAULT Restore the camera system settings to their original, out-of-the-
box state. Exposure settings are not affected when you restore
the camera system settings.
RESTART Reboot the PTZ camera. OSD settings are not affected when
you reboot the camera.
7.2.2 Display Settings
PRESET ON / OFF
AZIMUTH DISP ON / OFF
POSITION ON / OFF
INSIDE TEMP
• °C
• °F
• OFF
#LX400046; r. 2.0/22386/22410; en-US
18