User Guide

Accessing the CB-3102 via a Web Browser
34
Ariel CB-3102 User and Installation Guide
January 14, 2019
To change the date and time
1. Select one of the following options
 Manual Settings – Enter the date and time in the respective field.
 Synchronize with PC – Enter the date and time in the respective field.
 Synchronize with NTP Server – Selecting this option opens the NTP Settings section:
Figure 36: NTP Setting Section
Enter the following details in the NTP Setting section:
 Enable – From the drop-down list, select Manual to set the NTP server manually,
or From DHCP Server to set the time according to the network DHCP server.
 Server Address – Enter the IP address for the NTP server.
 Synchronization Period – Select a number between 1-24 for the frequency (in
number of hours) that the camera will synchronize with the NTP time server (i.e.,
every one hour, every two hours, etc.).
2. In the Time Zone Setting section, from the Area drop-down list, select your local time zone.
3. Click Save. The new time is displayed in the Current Camera Time text box.
6.3.1.2.2 Audio (CB-3102-11-I only)
Available only on the CB-3102-11-I, the Audio screen is used for configuring Audio In settings.
Figure 37: Basic Configuration > Audio Screen
To enable audio settings
1. From the Enable drop-down list, select ON.
2. From the Encoding drop-down list, select G.711 a-law, G.711 μ-law, or AAC. The default is AAC.
3. From the Level drop-down list, select High, Mid, or Low.
6.3.1.2.3 Firmware
The Firmware screen displays and is used to update the system firmware, and to display the hardware
version, product name (model number), product serial number, and product MAC address. To access
the Firmware screen, select Basic Configuration > Firmware.
Figure 38: Firmware Screen