User Guide

Accessing the CB-3102 via a Web Browser
36
Ariel CB-3102 User and Installation Guide
January 14, 2019
Click Reboot to save configured settings.
Click Partial factory defaults to restore factory defaults, but retain network settings (IP address,
netmask address, and gateway address), TV format, and image rotation settings.
Click Full factory defaults to restore factory defaults, including network settings.
Caution:
Selecting Full factory defaults causes the camera to lose all network settings.
Attention:
Sélection par Défaut Complet d'Usine entraîne la caméra de perdre tous les paramètres réseau.
To select the TV format
1. Select Basic Configuration > Basic Operations. The Basic Operations screen is displayed.
2. From the drop-down list, select NTSC or PAL. The default is NTSC.
To import a setting
1. Click Browse to select the file.
2. Click Import to upload the file.
To export a setting
1. Click Export. An information bar opens.
2. Click Save in the information bar to save the file.
To reboot the camera
1. Click Reboot. The camera reboots. After the reboot finishes, a popup window opens with the
message “Rebooting complete”.
2. Click OK. A dialog box opens, requesting you to close the tab in your browser.
3. Close the tab.
4. Open a new tab in your browser, and re-enter the camera’s IP address. The camera’s Login
window opens.
5. Enter your login credentials. The camera’s home page opens.
To restore partial factory defaults
1. Click Partial factory defaults. The camera reboots. After the reboot finishes, a popup window
opens with the message “Rebooting complete”.
Note:
Since the unit’s IP address might change when restoring full factory defaults, it is
recommended to use DNA to discover the unit after rebooting.
2. Click OK. A dialog box opens, requesting you to close the tab in your browser.
3. Close the tab.
4. Open a new tab in your browser, and re-enter the camera’s IP address. The camera’s Login
window opens.
5. Enter your login credentials. The camera’s home page opens.