User Guide

Accessing the CB-3102 via a Web Browser
84
Ariel CB-3102 User and Installation Guide
January 14, 2019
Continue to configure the other settings in the Exposure section:
 Shutter Speed – Select the shutter speed from the following options:
Manual
Shutter Speed
Manual
Shutter Speed
PAL
NTSC
PAL
NTSC
1/25
1/30
1/1000
1/1000
1/50
1/60
1/2500
1/2500
1/100
1/120
1/5000
1/5000
1/250
1/250
1/10000
1/10000
1/500
1/500
 Gain – Set the gain between 0-48 dB. Increasing the gain lightens dark pictures resulting from
low-level lighting. The default is 0.
 Digital WDR – See the explanation in the Auto Mode section above.
In the Day/Night Switch Control section, configure the following setting:
 Mode – See the explanation in the Auto Mode section above.
In the IR Control section, configure the following settings:
 Mode – See the explanation in the Auto Mode section above.
 LED Brightness – See the explanation in the Auto Mode section above.
Click Reset if you want to return to factory default settings.
Picture Adjustment
The Picture Adjustment screen enables you to configure picture quality, color and mirror flip settings.
Figure 99: Picture Adjustment Screen
Settings are saved automatically after configuration. To restore settings to factory default, click Reset.
To configure quality settings
1. In the Quality section, configure the following settings:
Sharpness  Set the slider between 0-100, which provides the highest
sharpness around the edges and for small features. The default setting is 40.
3D Noise Reduction  Set the slider between 0-100. The default setting is 20.
Gamma Correction  From the drop-down list, select 0.45 or 1. The default
setting is 0.45. Gamma correction is used to ensure faithful reproduction of
an image. When gamma = 1, the original image is the same as the image
displayed on your screen. If the gamma is set at 0.45, there will be less
contrast.