User Guide
Configuration and Operation
68
CF-5212/CF-5222 User and Installation Guide
April 25, 2017
Software Upgrade
The Software Upgrade screen enables you to select a software file to upload.
Figure 57: Software Upgrade Screen
Note:
1. Make sure that the software upgrade file is available before performing a software upgrade.
2. Do not change the file name. If you change the upgrade file name, the system will fail to find the
file.
3. Analytics firmware is stored in a separate file than the camera system software. To upgrade the
analytics firmware version, see Analytics > Firmware.
Warning:
1. Do not unplug power while entering file names.
2. Do not unplug power or change the screen while upgrading software.
Avertissement:
1. Ne débranchez pas l'alimentation pendant la modification des noms de fichiers.
2. Ne débranchez pas l'alimentation pendant la mise à niveau du logiciel.
To upgrade the software
1. In the Step 1 text box, click Browse and select the binary file to be uploaded, for example,
uImage_userland_ioi_HD_camera_20151023.img (uImage_userland_all.img).
2. Select the file to upgrade. In the above example uImage_userland (userland.img) is
selected.
3. Click UPGRADE. The system verifies that the upgrade file exists and begins to upload the file.
The upgrade status bar is displayed on the page. When the upgrade process is completed, the
Live page is displayed.
4. Close and reopen the web browser.
Note:
If you have problems with the ActiveX plugin, see Installing and Deleting the Web Player
(page 116)