Product Manual

FLIRCM174USERMANUALDocumentIdentifier:CM174‐en‐US_AB

5.4.4.6FlexClampAdaptorUse

FLIRClampAdaptors(ModelsTA72andTA74)canbeconnectedtotheCM174todisplay

currentmeasurementsmadebytheFlexClampAdaptor.

1. Turnthefunctiondialtothe position.

2. ConnecttheFlexClampasshown.

3. SettherangeoftheFlexClampadaptortomatchtherangeoftheCM174.For

convenience,theCM174willdisplaytherangesetting(100mv/A).

4. OperatetheFlexClampperinstructionsprovidedwiththeFlexClampmeter.

5. Readthecurrent

measuredbytheFlexClamponthedisplay.



Figure5.4ConnectingaFLIRFlexClampAdaptor