Product Manual

FLIRCM82USERMANUALDocumentIdentifier:CM82‐en‐US_AD
17
5.6.3.8VFDMode(lowpassfilter)
TheVFDmodeeliminateshighfrequencynoiseinvoltagemeasurementsbymeansofalow‐passfilter.
TheVFDmodeisdesignedforvariablefrequencydrive(VFD)measurements.Thismodeisavailablefor
measurementsofACcurrentorvoltage.

1.Usethenavigationbuttonstoselect
andactivatetheVFDmode
5.7Non‐ContactVoltageDetector
Note:Testonaknownlivecircuitbeforetestingonanunfamiliarcircuit.
1. Holdtheclamptipsofthemeterveryclosetothevoltagesource.
2.
Ifvoltageispresent,thenon‐contactvoltagealertlamp(seesection4.1Meterparts)
illuminatesaredcolor.

CAUTION
Ifthenon‐contactvoltagealertlampisnotilluminated,voltagecouldstillbepresent.