Datasheet

ManualsBrandsFLIR ManualsMultimetersFLIR CM94 Clamp meter Digital CAT IV 1000 V Display (counts): 6000

The CM94 clamp meter is designed to tackle high-current

measurements in demanding utility and industrial job sites.

Its oversized, 55 mm jaw can securely clamp around conductor

wires and busbars for accurate readings up to 2000 A AC & DC.

Designed with a CAT IV-1000 V safety rating, the CM94 is

ready to work on relays, distribution panels, and switchgear

as well as service conductors, feeders, and production

power lines. VFD mode allows you to tackle noisy signal

environments to ensure correct measurements when working

on large motors and motor controls. Utilities and industrial

electrical technicians demand the best, and FLIR delivers with

the rugged and dependable CM94 clamp meter.

www.ir.com/CM94

2000 A AC/DC UTILITY CLAMP METER

FLIR CM94

™

PACKED WITH THE

FUNCTIONS YOU NEED

This full-featured clamp meter saves time and helps

you troubleshoot effectively

GREATER SAFETY SO YOU

CAN FOCUS ON RESULTS

Get the right tool for high current jobs with improved

safety built in

• Trust accurate AC voltage and current

measurements with True RMS, LoZ, and VFD

mode to lter signal noise

• Troubleshoot connections and components with a

Continuity test mode

• Measure resistance, frequency, and temperature

• Work your way with both auto- and manual-

ranging settings

• CAT IV-1000 V rating protects from dangerous

transient overvoltage near utility service

equipment

• Get accurate current readings on high current

equipment up to 2000 A AC/DC

• Eliminate errors from residual ghost voltage using

LoZ (low impedance) mode

THE RIGHT TOOL FOR

INDUSTRIAL JOBS

The FLIR CM94 features an oversized jaw to clamp

around large conductors or multiple conductors

• Generous jaw opening of 55 mm (2.2 in)

• Perfect for industrial electricians, utility workers,

and electrical contractors

• Ergonomic design is easy to hold with thumb dial

for one-hand operation

• Bright, large backlit 6000 count display that’s

easy to read in any conditions

Summary of content (2 pages)

PAGE 1
2000 A AC/DC UTILITY CLAMP METER FLIR CM94™ The CM94 clamp meter is designed to tackle high-current measurements in demanding utility and industrial job sites. Its oversized, 55 mm jaw can securely clamp around conductor wires and busbars for accurate readings up to 2000 A AC & DC. Designed with a CAT IV-1000 V safety rating, the CM94 is ready to work on relays, distribution panels, and switchgear as well as service conductors, feeders, and production power lines.
PAGE 2
S P E C I F I C AT I O N S Basic measurement capabilities Display Safety category rating CAT IV-1000 V Screen True RMS Yes 3- 5/6 digits 6000 counts 3-½ digits 1999 counts for Hz Backlight Yes Auto power off 34 minutes Overload indication “OL” or “-OL” Low battery indication Yes Features Data hold Yes Relative DC zero Yes LoZ mode (auto range) Yes VFD Yes Jaw size 55 mm (2.