Product Manual

FLIRDM92USERGUIDEDocumentIdentifier:DM92‐en‐US_AB

5.11.9SetupMode

InSetupmode,youcandefinethesettingsforvariousmeteroptions:

 Autopoweroff(indicatedbythetextAPO):Amodewherethetimeperiodafter

whichthemeterenterssleepmodecanbeset.Therangeis1to30minutes,or

OFF.Thefactorydefaultis

10minutes.

 Autobacklightoff(indicatedbythetextb.Lit):Amodewherethetimeperiod

afterwhichthebacklightturnsoffcanbeset.Therangeis1to30minutes,or

OFF.Thefactorydefaultis5minutes.

 Continuitythreshold(indicatedbythetextCntin):A

modewherethethreshold

forcontinuitytestscanbeset.

 Autohold(indicatedbythetextA.Hold):SelectAutoholdmodeON(Autohold

modeactive)orOFF(Dataholdmodeactive).Formoreinformation,seesection

5.12NormalholdmodeandAutoholdmode.

1. Select

andenableSetupmodeasdescribedinsection5.11.1Selectingthemode.

2. Usetheup/downarrowsbuttontocyclethroughthemodeoptionsAPO,b.Lit,Cntin,

A.Hold,andRESETshownonthesecondarydisplay.

3. Pressthe

buttontoactivatethedisplayedoption.

 APO:Usethe

and buttonstochangetheautopowerofftime.

 b.Lit:Usethe and buttonstochangetheautobacklightofftime.

 A.Hold:Usethe and buttonstoconfigureautohold/datahold.Onindicates

thattheautoholdmodeisactive.Offindicatesthatthedataholdmodeisactive.

 Cntin:Usethe and buttonstochangethecontinuitythreshold.

 RESET:Pressthe

buttontoresetthesettingstothefactorydefault.



5.11.10SilentMode

InSilentmode,thealertbeeperisdisabled.Silentmodedoesnotaffectthecontinuitybeeper.



Select

andenableSilentmodeasdescribedinsection5.11.1Selectingthemode.

