Instruction Manual

10
Using the System
Using Quick Playback
Quick Playback is used to playback the last 5~60 minutes of video from the selected channel. You
can also access Quick Playback in split-screen mode, while still viewing live video from the other
channels.
To use Quick Playback:
1. Move your mouse to the top of
the channel display and click .
NOTE: By def
ault, the NVR will begin playback from 5 minutes ago. You can increase this to up
to 60 minutes using the Realtime Play setting in Main Menu>Setting>General.
2. Right-click to exit Quick Playback.
Using Digital Zoom in Live Display
1. Move your mouse to the top of the channel display and click to activate digital zoom. The
icon will change to to indicate digital zoom is activated.
NOTE: Y
ou may activate digital zoom in multiple channels at the same time.
2. Click and drag inside the channel to zoom in.
• Click and drag to pan the zoom area.
• Right-click
to zoom out and select a new zoom area.
• Click to disable digital zoom. Note that the channel will remain at the same zoom level
until you right-click inside it.
Using Real-time Backup
Real-time backup allows you to save footage from the live display to a USB flash drive (not
included) or external hard drive (not included).
To use Real-time Backup:
1. Insert the USB flash drive or external hard dr
ive into one of the USB ports on the system.
2. Move your mouse to the top of
the channel display and click to start Real-time Backup.
The icon changes to .
3. Click again to end Real-time Backup. The f
ile is saved to your USB device.
NOTE: If
the system prompts you to log in, you will need to click again to start Real-time
Backup after logging in.