Instruction Manual

25
Using the Main Menu
• A visual representation of the current
schedule is shown below.
4. (Optional) Click Copy to copy the selected
to schedule to other channels. Select the
channels you would like to copy to and
click OK.
5. Click OK t
o save changes.
Configuring Pre-Recording and Mirror
Recording
Pre-recording determines the amount of time
the system will record before events.
Mirroring allows the camera to record
simultaneously to a secondary mirror hard
drive and primary recording hard drive.
NOTE: Sec
ondary hard drive must be
installed and configured for redundancy to
use redundancy function.
To configure pre-recording and redundancy:
1. Under Channel, sel
ect the camera you
would like to configure or select All.
2. Under Pr
eRecord, select the duration for
pre-recording.
3. Check Mi
rroring to enable redundant
recording for the selected channel.
4. Click OK t
o save settings.
Configuring Holidays
Holiday settings allow you to configure a
special recording schedule on certain days.
To configure holidays:
1. Check the checkbox next to Holidays
Se
tting to enable holidays.
2. Click Holidays Set
ting.
3. Click days in the calendar to enable them
as
holidays. Selected holidays are
highlighted in blue.
4. Click OK. C
lick OK to save changes.
Network
The Network sub-menu allows you to
configure network settings.
Configuring DHCP or Fixed IP Address
1. From live view, right-click and select Main
Menu. Login if prompted.
2. Click Setting>Network.
3. Check DHCP
to use DHCP or un-check to
use a static IP address. If you un-check
DHCP, configure the following:
• IP Address
• Subne
t Mask
• Gateway
• Preferred DNS
• Alternate DNS
4. Click Sav
e to save your changes. Restart
the system to update the IP address.
Configuring System Ports
The system uses the following ports:
• T
CP Port (Client Port): Used for remote
video streaming to computers and mobile
devices. The default port number is 35000.