Instruction Manual

26
Using the Main Menu
• HTTP Port: Used to enable connection to
the system’s web browser interface. The
default port number is 80.
• UDP Port: Used for special applications.
The default port number is 35001.
• RTSP Port: Used for special applications.
The default port number is 554.
You must port forward the TCP (Client) Port
and HTTP Ports to enable remote access to
the system.
To configure ports:
1. Configure the TC
P Port (Client), HTTP
Port, UDP Port, and RTSP Port fields as
needed.
NOTE: Pl
ease note that if the HTTP is port
is anything other than 80, you must enter
http:// before the camera’s IP address and
colon (:) and the HTTP port after the IP
address when connecting using an Internet
browser (e.g. if the HTTP port is
85 , enter
http://192.168.x.x:85 ).
2. Click Sav
e. The system will restart to
update the ports used.
Configuring NTP
You can sync the system clock with an Internet
NTP time server.
To sync the system with a time server:
1. Click Netw
ork Setting.
2. Check NTP.
3. Double-click NTP t
o open the
configuration menu.
4. Configure the following:
• Under Se
rver IP, enter the IP or DNS
address of the NTP server.
• Under Port, enter the NTP server port
number.
• Under Time Zone, select your time zone.
• Under Update Period, enter the interval
your system will sync the time with the
selected server.
TIP: Cl
ick Manual Update to test the server
settings entered and manually sync the system
time.
5. Click OK. C
lick Save to save your changes.
Configuring DDNS
The DDNS Setup window allows you to enter
your FLIR DDNS settings in the NVR. This step
is required for remote access.
Prerequisites:
• Create a DDNS account. For details, see
“
Appendix D: Setting Up DDNS Service” on
page 97.
• Port forward ports on your router to NVR’s
IP address (by default, ports 35000 and 80).
• Have your DDNS account name, password,
and domain name ready.
To configure DDNS settings:
1. Click Netw
ork Setting.
2. Check DD
NS.
3. Double-click DD
NS.
4. Ensure Ena
ble is checked. The box will be
white when DDNS is enabled.
5. Under Do
main Name, enter the Domain
Name from the confirmation email you
received after registering for DDNS.