Instruction Manual

49
FLIR SyncroIP NVR Central Management Software
1. Click Config Manager>Scheme Task Config.
2. Click Mo
nitor Project.
3. Click Ne
w.
4. Enter a Name f
or the project. You may not change the name after the project is created.
5. Under Mo
de, select Tour Mode or Schedule Mode. Tour Mode will cycle through tasks on a
fixed interval. Schedule Mode will switch tasks at a pre-defined time of the day.
6. Under Ta
sk Name, select the task you would like to add to the project.
• If you selected Tour Mode, enter the Interv
al Time in minutes that the task will run for before
changing to the next task.
• If you selected Schedule Mode, enter the time of day when the task will start running.
7. Click Ad
d.
8. Repeat steps 6-7 for each additional task y
ou would like to add to the project.
9. Click OK. Cl
ick OK to save changes.
Running Tasks and Projects
• Once you have configured tasks or projects, you may run them by clicking Task ( ) and
then selecting the task or project you would like to run.
Click Monitor Project
Enter project name
Select project type
Select task
Enter interval or start time
Click Add