Instruction Manual
Table Of Contents
- Basic Setup
- Front Panel
- Rear Panel
- Getting Started
- Remote Control
- Using the System
- Setting the Time
- Recording
- Search (Playback)
- Backup
- Using the Main Menu
- FLIR SyncroIP NVR Central Management Software
- System Requirements
- Prerequisites
- Installing FLIR SyncroIP NVR CMS
- Adding a NVR from the local area network (LAN)
- Adding a NVR using a DDNS address
- Using Alarm Rec (Event Search)
- Using Playback Mode
- Configuring Monitoring Tasks and Projects
- Using E-Map
- Configuring the CMS
- Adding User Accounts to the CMS
- Multi-Monitor Support
- Remote Viewing on Internet Explorer
- Mobile Connectivity
- Appendix A: System Specifications
- Appendix B: Setting up Remote Viewing
- Appendix C: Auto Port Forwarding Wizard
- Appendix D: Setting Up DDNS Service
- Appendix E: Remote Firmware Upgrade
- Appendix F: Hard Drive Installation
- Appendix G: Connecting an External Monitor
- Troubleshooting
61
Mobile Connectivity
MOBILE CONNECTIVITY
The DNR200 Series is compatible with iPhone, iPad and Android devices.
iPhone
FLIR SyncroIP NVR is an iPhone app that allows you to remotely view your NVR.
System Requirements
• iOS 4.3 or later.
Prerequisites
• Port 80 (or whichever port your system is using) must be port forwarded to your router.
• You must create a DDNS account, and have the DDNS settings configured in your NVR.
• The NVR must have internet access.
• You must have a DDNS address to log in remotely.
• An iTunes account.
NOTE: Y
ou will need to create an iTunes account before you can download the app. An iTunes
store account requires a valid credit card number. The app is free of charge.
Connecting to your NVR on an iPhone
1. Download FLIR SyncroIP NVR for free from the App Store.
2. Tap on the FLIR SyncroIP NVR icon ( ) to start the app.
3. Tap .
4. Tap De
vice Manager.
Device Manager