Quick Connect Guide

427-0064-00-28 Rev 100 August 2017
Step 3 Point camera. Setting the final scene view of the camera may
require two people; one to view the video, the other to point the camera.
Typically direct the camera towards the ground with a tilt angle α of 45° to
60°. Include as little skyline as possible in the field of view.
a.Loosen the base set screw in order to rotate the
camera at the base.
b. Loosen the two ball-joint set screws in order to
manipulate the camera positioning at the ball
joint. The camera can be twisted and pointed up
or down at the ball joint.
c.Point the camera in the desired direction and
fasten the screws.
α
Ball-joint
set screws
Base set screw
427-0064-00-28 FB-Series Quick Connect.fm Page 4 Thursday, August 17, 2017 11:17 AM