User Guide

427-1065-00-12 Revision 130 November 2019 19
This document does not contain any export-controlled information.
Basic Operation and Configuration
2.4.2 Server Menu
When a user logs in as expert or admin, the Maintenance Server menus are
available. When the Server menu is selected, the LAN Settings page
appears.
The basic camera configuration steps are accessed through the Maintenance
Server menu, using the menus on the left side of the page. The LAN
Settings, Services, and Security Options selections are described below.
The expert login has access to these Server pages, but will only see the
security settings for the expert login.
With most configuration changes through the Maintenance menu, it is
necessary to save the changes, then stop and restart the server to make the
changes take effect.
LAN Settings: The LAN Settings page can be used to set the hostname,
default gateway, and IP address for the camera. Scroll down to see settings for Domain Name
System (DNS) server.
IP Address
The IP Address mode can be set to DHCP or Static. When set to DHCP, if a DHCP server is not
available on the network, the IP address will default to 192.168.0.250. To set the IP address using
DNA, refer to Set IP Address using the FLIR Discovery Network Assistant (DNA), pg. 14.
Scroll down
to Save