Installation Manual

427-0089-00-12 Version 160 March 2019 35
This document does not contain any export-controlled information.
Basic Operation and Configuration
Server Status: The Server Status page provides an indication of the current server status (either
running or stopped) and buttons for starting or stopping the server or for rebooting the system.
After making configuration changes, it is necessary to save the changes to the server (there is a
Save button at the bottom of each configuration page). The configuration changes do not take effect
immediately. Generally, it is also necessary to stop and restart the server for the changes to become
effective. The server has a configuration that is active and running, and another configuration that is
saved (and possibly different than the running configuration).
The message at the bottom of the page indicates the
saved configuration is different than the active (running)
configuration, and it is necessary to restart the server.
It may take up to 20 seconds or more to stop the server, especially when there are multiple video
streams open. Be patient when stopping the server.
When the server is stopped and the page is refreshed, the status will show Server Stopped and the
Start button will be enabled.
Click on the Start button to restart the server, and when the page refreshes, the status will again
show Server Running. The Start button will be replaced by a Stop button when the startup procedure
has completed.
Note
Security Options: Use the Security Options page to enhance the camera’s security by:
• Restricting access through the camera web server to specific IP addresses
• Setting or changing passwords
If the server unexpectedly stops, it automatically and immediately restarts. After manually stopping
the server and not manually restarting it within one hour, the server automatically restarts.
Toggle Server (Stop/Start)