Installation Manual

427-0089-00-12 Version 160 March 2019 54
This document does not contain any export-controlled information.
Advanced Configuration
Check Calibration
1. Click the icon and set Analytics Enabled to Yes.
2. Set Show Tracking to Classified Boxes or Show Trig-
gered, then check the Lines box.
3. Click Save.
4. Have subjects (person, car, truck, etc) enter the area or
cross the tripwire at various distances from the camera.
The boxes should be classified correctly and the direc-
tion across tripwires should be as expected.
The image below shows a classified human box and tracking
line in a detection region. The boxes are white indicating an
alarm condition has occurred.
3.2 Maintenance Menu
The following sections describe more advanced camera configuration options that require the admin
login. For the configuration changes in the remainder of this chapter, it is necessary to save the
changes, then stop and restart the server to make the changes effective. Additional configuration
options are available that are not described in this manual. For more information on setting or
changing these camera parameters refer to the Nexus IP Camera Configuration Guide (FLIR Doc
#427-0030-00-28) or contact the local FLIR representative or FLIR Technical Support.
The basic camera configuration settings (LAN Settings, Services, and Security Options) available
through the expert login are described in Server Menu, pg. 28. When logged in as admin, additional
Maintenance menus are accessible, including Sensor, Files and Product Info.
2
3