User Manual

ManualsBrandsFLIR ManualsKitchenInsulation Tester/DMM with VFD and Bluetooth

FLIR IM75 USER MANUAL Document Identifier: IM75-en-US_AB

12

 CAPACITANCE/DIODE/CONTINUITY: The meter can measure capacitance, diode polarity

or continuity through the probe inputs. The type of measurement is chosen by the MODE

button.

 Zero Ω: The meter can measure earth-bond resistance, through the probe inputs. The

measurement unit is Ohms (Ω).

 50V: The meter can source a 50VDC TEST Voltage and measure Insulation Resistance

through the Zero Ω/Insulation and COM probe inputs.

 100V: The meter can source a 100VDC TEST Voltage and measure Insulation Resistance

through the Zero Ω/Insulation and COM probe inputs.

 250V: The meter can source a 250VDC TEST Voltage and measure Insulation Resistance

through the Zero Ω/Insulation and COM probe inputs.

 500V: The meter can source 500VDC TEST Voltage and measure Insulation Resistance

through the Zero Ω/Insulation and COM probe inputs.

 1000V: The meter can source 1000VDC TEST Voltage and measure Insulation Resistance

through the Zero Ω/Insulation and COM probe inputs.

4.4 Display Description

1. Main display area

2. Secondary display area

3. Bar graph (matches the reading on the main display)

4. Modes of operation (detailed later in this guide)

5. Units of measure for primary and secondary displays

6. Alerts and status icons (detailed below)

Fig 4-4 Display snapshot