Instruction Manual
Table Of Contents
- 1 Important Safeguards
- 2 M3100E Series Features
- 3 Getting Started (M3100E Series)
- 4 Front Panel (M3100E Series)
- 5 Rear Panel (M3100E Series)
- 6 Basic Setup (M3100E Series)
- 6.1 Step 1: Connect the BNC Cameras
- 6.2 Step 2: Connect the Mouse
- 6.3 Step 3: Connect the Ethernet Cable
- 6.4 Step 4: Connect the Monitor
- 6.5 Step 5: Connect the Power Adapter and Power on the DVR
- 6.6 Step 6: Upgrade Firmware to Latest Version (if Available)
- 6.7 Step 7: Verify Camera Image
- 6.8 Step 8: Set the Time
- 6.9 Default System Password & Port Numbers
- 6.10 Quick Access to System Information
- 7 About MPX
- 8 Mouse Control
- 9 Remote Control
- 10 Using the System
- 11 Setting The Time
- 12 Recording
- 13 Search (Playback)
- 14 Backup
- 15 Managing Passwords and User Accounts
- 16 Using the Main Menu
- 16.1 Camera
- 16.2 Info
- 16.3 Setting
- 16.3.1 Network
- 16.3.2 Selecting DHCP or Static IP Address (TCP/IP)
- 16.3.3 Configuring System Ports (Connection)
- 16.3.4 Configuring DDNS Settings
- 16.3.5 Configuring Email Alerts
- 16.3.6 Event
- 16.3.7 Configuring Motion Detection
- 16.3.8 Configuring Video Loss Settings
- 16.3.9 Configuring Hard Drive Warnings
- 16.3.10 Configuring Network Warnings
- 16.3.11 Storage
- 16.3.12 Configuring the Video Recording Schedule
- 16.3.13 Configuring Pre-Recording
- 16.3.14 Configuring the Snapshot Schedule
- 16.3.15 Configuring Holidays
- 16.3.16 Formatting the Hard Drive
- 16.3.17 Configuring Hard Drive Type
- 16.3.18 Configuring General System Settings
- 16.3.19 Setting the Monitor Resolution (Display)
- 16.3.20 Saving Your System Configuration to a USB Flash Drive
- 16.3.21 Setting the System to Factory Defaults
- 16.3.22 Upgrading Firmware from USB
- 16.4 Shutdown
- 17 Connecting to Your System Over the Internet on PC or Mac
- 18 Using FLIR Cloud™ Client for PC or Mac
- 19 Connecting to your System Using Smartphone or Tablet Apps
- 19.1 iPhone
- 19.1.1 Prerequisites
- 19.1.2 Connecting to your System on iPhone
- 19.1.3 Live View Interface
- 19.1.4 Controlling PTZ Cameras
- 19.1.5 Viewing Snapshots and Videos with Local Files
- 19.1.6 Using Playback Mode on iPhone
- 19.1.7 Enabling Push Notifications
- 19.1.8 Using the Event List
- 19.1.9 Using Favorites
- 19.1.10 Using the E-Map
- 19.1.11 Device Manager
- 19.1.12 Adding Devices Using an IP or DDNS Address (Advanced)
- 19.2 iPad
- 19.2.1 Prerequisites
- 19.2.2 Connecting to your system on an iPad
- 19.2.3 Live View Interface
- 19.2.4 Controlling PTZ Cameras
- 19.2.5 Using Playback Mode on iPad
- 19.2.6 Using Local File to View Manual Recordings
- 19.2.7 Enabling Push Notifications
- 19.2.8 Using the Event List
- 19.2.9 Using Favorites
- 19.2.10 Using the E-Map
- 19.2.11 Using the Device Manager
- 19.2.12 Adding Devices Using an IP or DDNS Address (Advanced)
- 19.3 Android
- 19.3.1 Prerequisites
- 19.3.2 Connecting to your System on Android
- 19.3.3 Live View Interface
- 19.3.4 Controlling PTZ Cameras
- 19.3.5 Viewing Snapshots and Videos with Local Files
- 19.3.6 Using Playback Mode on Android
- 19.3.7 Enabling Push Notifications
- 19.3.8 Using the Event List
- 19.3.9 Using Favorites
- 19.3.10 Using the E-Map
- 19.3.11 Device Manager
- 19.3.12 Adding Devices Using an IP or DDNS Address (Advanced)
- 19.1 iPhone
- 20 DDNS Setup (Advanced)
- 21 Connecting a PTZ Camera (M3100E Series)
- 22 M3100E Series Hard Drive Installation
- 23 Troubleshooting
- 24 M3100E Series System Specifications
- 25 Notices
Remote Control
9
9.1 Setting the Remote Control Address
If you have more than one system, you can set up your remote control to pair with a specif-
ic system.
To set the remote control address:
1. Right-click and click Main Menu. Enter the system user name (default: admin) and
password (default: 000000).
2. Click
and then click Setting>General>General.
3. Under Device No., enter the address number you would like to assign to the remote
control.
4. Click OK.
5. Using the remote control, press Add. Then enter the address number and press Enter.
NOTE
When entering the address number using the remote, make sure that you press three digits. A sin-
gle-digit number should be preceded by two zeros. A two-digit number should be preceded by one
zero. For example, if you entered 8 as the Device No., you have to press Add then 008 on the
remote.
#LX400028; r.27370/27370; en-US
16