Instruction Manual
Table Of Contents
- 1 Important Safeguards
- 2 M3100E Series Features
- 3 Getting Started (M3100E Series)
- 4 Front Panel (M3100E Series)
- 5 Rear Panel (M3100E Series)
- 6 Basic Setup (M3100E Series)
- 6.1 Step 1: Connect the BNC Cameras
- 6.2 Step 2: Connect the Mouse
- 6.3 Step 3: Connect the Ethernet Cable
- 6.4 Step 4: Connect the Monitor
- 6.5 Step 5: Connect the Power Adapter and Power on the DVR
- 6.6 Step 6: Upgrade Firmware to Latest Version (if Available)
- 6.7 Step 7: Verify Camera Image
- 6.8 Step 8: Set the Time
- 6.9 Default System Password & Port Numbers
- 6.10 Quick Access to System Information
- 7 About MPX
- 8 Mouse Control
- 9 Remote Control
- 10 Using the System
- 11 Setting The Time
- 12 Recording
- 13 Search (Playback)
- 14 Backup
- 15 Managing Passwords and User Accounts
- 16 Using the Main Menu
- 16.1 Camera
- 16.2 Info
- 16.3 Setting
- 16.3.1 Network
- 16.3.2 Selecting DHCP or Static IP Address (TCP/IP)
- 16.3.3 Configuring System Ports (Connection)
- 16.3.4 Configuring DDNS Settings
- 16.3.5 Configuring Email Alerts
- 16.3.6 Event
- 16.3.7 Configuring Motion Detection
- 16.3.8 Configuring Video Loss Settings
- 16.3.9 Configuring Hard Drive Warnings
- 16.3.10 Configuring Network Warnings
- 16.3.11 Storage
- 16.3.12 Configuring the Video Recording Schedule
- 16.3.13 Configuring Pre-Recording
- 16.3.14 Configuring the Snapshot Schedule
- 16.3.15 Configuring Holidays
- 16.3.16 Formatting the Hard Drive
- 16.3.17 Configuring Hard Drive Type
- 16.3.18 Configuring General System Settings
- 16.3.19 Setting the Monitor Resolution (Display)
- 16.3.20 Saving Your System Configuration to a USB Flash Drive
- 16.3.21 Setting the System to Factory Defaults
- 16.3.22 Upgrading Firmware from USB
- 16.4 Shutdown
- 17 Connecting to Your System Over the Internet on PC or Mac
- 18 Using FLIR Cloud™ Client for PC or Mac
- 19 Connecting to your System Using Smartphone or Tablet Apps
- 19.1 iPhone
- 19.1.1 Prerequisites
- 19.1.2 Connecting to your System on iPhone
- 19.1.3 Live View Interface
- 19.1.4 Controlling PTZ Cameras
- 19.1.5 Viewing Snapshots and Videos with Local Files
- 19.1.6 Using Playback Mode on iPhone
- 19.1.7 Enabling Push Notifications
- 19.1.8 Using the Event List
- 19.1.9 Using Favorites
- 19.1.10 Using the E-Map
- 19.1.11 Device Manager
- 19.1.12 Adding Devices Using an IP or DDNS Address (Advanced)
- 19.2 iPad
- 19.2.1 Prerequisites
- 19.2.2 Connecting to your system on an iPad
- 19.2.3 Live View Interface
- 19.2.4 Controlling PTZ Cameras
- 19.2.5 Using Playback Mode on iPad
- 19.2.6 Using Local File to View Manual Recordings
- 19.2.7 Enabling Push Notifications
- 19.2.8 Using the Event List
- 19.2.9 Using Favorites
- 19.2.10 Using the E-Map
- 19.2.11 Using the Device Manager
- 19.2.12 Adding Devices Using an IP or DDNS Address (Advanced)
- 19.3 Android
- 19.3.1 Prerequisites
- 19.3.2 Connecting to your System on Android
- 19.3.3 Live View Interface
- 19.3.4 Controlling PTZ Cameras
- 19.3.5 Viewing Snapshots and Videos with Local Files
- 19.3.6 Using Playback Mode on Android
- 19.3.7 Enabling Push Notifications
- 19.3.8 Using the Event List
- 19.3.9 Using Favorites
- 19.3.10 Using the E-Map
- 19.3.11 Device Manager
- 19.3.12 Adding Devices Using an IP or DDNS Address (Advanced)
- 19.1 iPhone
- 20 DDNS Setup (Advanced)
- 21 Connecting a PTZ Camera (M3100E Series)
- 22 M3100E Series Hard Drive Installation
- 23 Troubleshooting
- 24 M3100E Series System Specifications
- 25 Notices
Using the Main Menu16
2. Under Event Type, select the event type you would like to configure.
• Net Disconnection: The system has lost connection to the network.
• IP Conflict: More than one device on your network has the same IP address.
• MAC Conflict: More than one device on your network has the same MAC address.
• All: Configure responses for all network events.
3. Configure the following for the selected event type:
• Enable: Check to enable the selected event type.
• Show Message: Check to show a popup message when the selected event occurs.
• Send Email: Check to enable email alerts. You must configure email alerts before
you will be able to receive them (see 16.3.5 Configuring Email Alerts, page 53).
• Buzzer: Check to activate the system buzzer.
• Record Channel: If Net Disconnect is selected, you can set the system to trigger
recording after it loses connection to the network. Check Record Channel to ena-
ble video recording and select the channels you would like to record. Set the
amount of time you would like the system to record under Post_REC.
4. Click OK to save changes.
16.3.11 Storage
The Storage menu allows you to configure the recording schedule and hard drives con-
nected to the system.
16.3.12 Configuring the Video Recording Schedule
You can set a custom recording schedule according to your needs. For example, you can
set the system to record continuously during business hours and record on motion detec-
tion only outside of business hours.
A custom recording schedule helps reduce the amount of hard drive space required, in-
creasing the time your system can retain recordings.
To configure the video recording schedule:
1. From the Main Menu, click
and then click Storage>Schedule>Record.
2. Under Channel, select the channel you would like to configure or select All.
#LX400028; r.27370/27370; en-US
59