Product Manual

ManualsBrandsFLIR ManualsAccessories for Environmental MonitoringWall Cavity Probe

Wall Cavity Probe

General description

Part number MR06

Part name Wall Cavity Probe

The FLIR MR06 Wall Cavity Probe expands the functionality of your FLIR moisture meter by allowing

you to easily measure insulation moisture levels within a wall cavity and the inside face of exterior

walls.

FLIR’s new insulated pins are smaller in diameter—requiring minimal force to drive the pins into a

surface—resulting in less impact to the material. The sandblasted, hardened-steel pins with a single-

piece design prevent bending and create an improved bonding surface for the abrasion-resistant

insulation. The insulation extends all the way to the connection to the probe, so even if you drive the

pins all the way into the wall cavity, the drywall will not affect the measurement.

• Insulated pins designed for increased durability.

• Rubberized ergonomic grips reduce slippage.

• Detachable cord with a durable BNC connection.

• Pins included: 1 pair of 4 in. pins, 1 pair of 6 in. pins.

• Impact plate to drive pins through a drywall.

Meter data

Suitable main unit MR77, MR160, MR176

Cable length 2.45 m (8 ft.) uncoiled

Included insulated pin pairs and length 1 pair of 4 in. (101 mm), 1 pair of 6 in. (152 mm)

Warranty 2 years (with registration)

Meter physical data

Weight: 0.50 kg (1.10 lb.)

Dimensions (H × W × L) 4.5 cm × 5.97 cm × 28.49 cm (1.8 in. × 2.4 in. ×

11.2 in.)

Material PC-ABS

Color Black

Shipping information

Packaging type

Color retail packaging

Packaging contents MR06, 1 pair 4 in. insulated pins, 1 pair 6 in.

insulated pins, cable, impact plate, pin wrench

Packaging weight 0.6 kg (1.3 lb.)

Packaging dimensions (H × W × L) 5.3 cm × 12.3 cm × 19.5 cm (2 in. × 4.9 in. × 7.7

in.)

P/N: MR06

appearing herein are either registered trademarks

or trademarks of FLIR Systems and/or its

subsidiaries. All other trademarks, trade names or

company names referenced herein are used for

identification only and are the property of their

respective owners.

Document identity

Publ. No.: MR06

Release:

Commit: 30133

Language: en-US

Modified: 2015-10-31

Formatted: 2015-11-02

Website

http://www.flir.com

Customer support

http://support.flir.com

Disclaimer

Specifications subject to change without further

notice. Camera models and accessories subject

to regional market considerations. License

procedures may apply. Products described herein

may be subject to US Export Regulations. Please

refer to exportquestions@flir.com with any

questions.

1 (3)

www.flir.com

Summary of content (3 pages)

PAGE 1
Wall Cavity Probe P/N: MR06 Copyright © 2015, FLIR Systems, Inc. All rights reserved worldwide. Names and marks appearing herein are either registered trademarks or trademarks of FLIR Systems and/or its subsidiaries. All other trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective owners. Document identity Publ. No.
PAGE 2
Wall Cavity Probe P/N: MR06 Shipping information © 2015, FLIR Systems, Inc. Master carton weight 11 kg (24.24 lb.) Master carton dimensions (H × W × L) 24 cm × 28 cm × 44.5 cm (9.5 in. × 11 in. × 17.5 in.) Master carton quantity 16 EAN-13 0793950370063 UPC-12 793950370063 Country of origin China Tariff code 9025900000 #MR06; r. /30133; en-US Technical support Website http://support.flir.com E-mail TMsupport@flir.com Phone 855-499-3662 Repairs repair@flir.
PAGE 3
© 2015, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.