Product Manual

ManualsBrandsFLIR ManualsAccessories for Environmental MonitoringHammer and Wall Cavity Probe Combo with Shoulder Bag

Hammer and Wall Cavity Probe Combo

General description

Part number MR08

Part name Hammer and Wall Cavity Probe Combo

The FLIR MR08 Hammer and Wall Cavity Probe Combo is ideal for both hammer probe and wall cavity

applications. The hammer probe has an additional handle on the bottom to add convenience for

angled, horizontal, and inverted hammer-probing needs. The bottom handle can be unscrewed and

used as a wall cavity probe to measure the moisture level of insulation within the wall cavity and can

also reach the inside face of an exterior wall. You can also install the impact plate for use with a

hammer to punch the extended pins through drywall.

FLIR’s new insulated pins are smaller in diameter—requiring minimal force to drive the pins into a

surface—resulting in less impact to the material. The sandblasted, hardened-steel pins with a single-

piece design prevent bending and create an improved bonding surface for the abrasion-resistant

insulation. The insulation extends all the way to the connection to the probe, so even if you drive the

pins all the way into the wall cavity, the drywall will not affect the measurement.

• Insulated pins designed for increased durability.

• Rubberized ergonomic grips reduce slippage.

• Detachable cord with a durable BNC connection.

• Pins included: 2 pairs of 2 in. pins, 1 pair of 4 in. pins, 1 pair of 6 in. pins.

• Impact plate to drive pins through a drywall.

Meter data

Suitable main unit MR77, MR160, MR176

Cable length 2.45 m (8 ft.) uncoiled

Included insulated pin pairs and length 2 pairs of 2 in. (50 mm), 1 pair of 4 in. (101 mm),

1 pair of 6 in. (152 mm)

Warranty 2 years (with registration)

Meter physical data

Weight 1.48 kg (3.25 lb.)

Dimensions (H × W × L) 4.5 cm × 5.97 cm × 56.9 cm (1.8 in. × 2.4 in. ×

22.4 in.)

Material

PC-ABS, stainless steel

Color

Black

Shipping information

Packaging type White box with accessory color printing

Packaging contents MR08, 2 pairs of 2 in. insulated pins, 1 pair of 4

in. insulated pins, 1 pair of 6 in. insulated pins,

cable, impact plate, pin wrench, shoulder case

P/N: MR08

appearing herein are either registered trademarks

or trademarks of FLIR Systems and/or its

subsidiaries. All other trademarks, trade names or

company names referenced herein are used for

identification only and are the property of their

respective owners.

Document identity

Publ. No.: MR08

Release:

Commit: 30135

Language: en-US

Modified: 2015-10-31

Formatted: 2015-11-02

Website

http://www.flir.com

Customer support

http://support.flir.com

Disclaimer

Specifications subject to change without further

notice. Camera models and accessories subject

to regional market considerations. License

procedures may apply. Products described herein

may be subject to US Export Regulations. Please

refer to exportquestions@flir.com with any

questions.

1 (3)

www.flir.com

Summary of content (3 pages)

PAGE 1
Hammer and Wall Cavity Probe Combo P/N: MR08 Copyright © 2015, FLIR Systems, Inc. All rights reserved worldwide. Names and marks appearing herein are either registered trademarks or trademarks of FLIR Systems and/or its subsidiaries. All other trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective owners. Document identity Publ. No.
PAGE 2
Hammer and Wall Cavity Probe Combo P/N: MR08 Shipping information © 2015, FLIR Systems, Inc. Packaging weight 5 kg (11.1 lb.) Packaging dimensions (H × W × L) 15.5 cm × 18 cm × 65 cm (6.1 in. × 7.1 in. × 25.6 in.) Master carton weight 11 kg (24.25 lb.) Master carton dimensions (H × W × L) 18.5 cm × 36.5 cm × 67 cm (7.3 in. × 14.4 in. × 26.4 in.) #MR08; r.
PAGE 3
© 2015, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.