User Guide

Specifications
Equipment described herein may require US Government authorization for
export purposes. Diversion contrary to US law is prohibited. Imagery for
illustration purposes only. Specifications are subject to change without
notice. ©2015 FLIR Systems, Inc. All rights reserved. (Updated 04/23/15)
FLIR MR160: Imaging Moisture Meter
Part Number MR160
Thermal imaging
Imaging detector FLIR Lepton, microbolometer focal plane array
Shutter
Integrated automatic shutter for auto at eld
correction
Thermal Image resolution (W × H) 4800 pixels (80 × 60)
Spectral response 8–14 μm
Field of view (W x H) 51° × 38°
Sensitivity <150mK
Image update speed frequency 9 Hz
Thermal image palettes Ice
Thermal image minimum
focus distance
10 cm (4”)
Moisture Measurement
Pin moisture via external probe
range (accuracy)
0–100% WME ± 5%
Pin moisture groups 9 material groups
Pinless moisture range 0–100 relative measurement
Measurement resolution 0.1
Response time Pinless 100 ms
Response time Pin Mode 750 ms
General information
Display type 320 x 240 pixel 2.3” 64K color TFT graphical display
Display resolution (W × H) QVGA (320 x 240)
Saved Image File format BMP with measurement values overlaid
Stored image capacity 9999 images
Laser Orientation Single laser pointer to center of thermal image
Power requirements: Integrated rechargable battery
Battery Power -
Continuous Run Time:
18 hours max
Battery Power - Typical Usage: 4 work weeks
Battery
3.7 V, 3000mAh (2 x 1500mAh Li-ion rechargeable
batteries) rechargeable via micro USB
Certication standards
EN61326 (EMC), EN61010 (Battery + Charger),
EN60825-1 Class 2 (Laser)
Agency approvals FCC Class B, CE, UL
Available Accessories
MR10 Protective Case
MR05 Impact Pin Probe
Color Display
Snap & Save
Pictures
Back Button
Laser
Laser
Lepton
®
Thermal
Imaging Sensor
Charging & Probe
Connector
Pinless Sensor
Navigation Button
Power
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com