User Manual

FLIRMR160USERGUIDE  DocumentIdentifier:MR160‐en‐US_AA

5.6CombinationMode:HeldThermalImagewithMoistureReading

TheMR160offersanadvancedfeaturethatallowstheuserto‘freeze’athermalimageand

continuetakingmoisturereadings.The‘held’thermalimage,withcontinuousmoisturereading

shownonthesamescreen,canthenbecapturedasexplainedinsection5.5above.

1. EntertheIR+MoistureImagemode(

refertoSection5.2.3ImageMode).

2. HoldtheCapturebuttonuntilcrosshairsappearandlaserarevisible(Fig.5‐8a)

3. WhilecontinuingtoholdtheCapturebutton,aimthelase ratthemeasurementspot

4. ReleasetheCapturebutton.Theimagewillfreezebutthemoisturereadingwillflashand

continuetoupdateasitwaitsforameasure

ment.

5. PresstheSelectbuttontomakeameasurementandcapture(save)theimage whichwill

includethemoisturereading(Fig.5‐8b)orpresstheBackbuttontocancelandreturnto

thenormaloperatingmode.

Fig.5‐8aLaser andCross‐hairsvisible;

AimtheLaseratthetestsurface

Fig.5‐8bSavedimagewithTargetarea

andMoisturereading