User Manual

FLIRMR160USERGUIDE  DocumentIdentifier:MR160‐en‐US_AA

5.7HighMoistureAlarm 

TheMR160offersaHighMoistureAlarmutilitywhereanaudibleandvisualalertactivateswhen

themoisturereadingexceedstheprogrammedhighlimit.

1. PresstheSelectbuttontoaccesstheMainMenu

2. SelecttheSETTINGSmode

fromtheMainMenu

3. ScrolltoALARMandpresstheSelectbuttontoopentheAlarmprogrammer

4. UsetheNavigationandSelectbuttonstoswitchthealarmONorOFFandtosetthe

thresholdfrom0%to100%

5. PresstheSelectbuttontoreturntotheSETTINGSmodeandsav

ethevalueorpressthe

backbuttontocancelandtoreturntothenormaloperatingmode

6. WhentheHighAlarmissetON,themaindisplaywillshowthealarmbellicon(shown

above)andtheHighAlarmthresholdvalue.RefertoexamplescreensshowninFig.5‐1

andFig.5‐2.

7. Whe

nthemeasurementexceedsthethreshold,thetextfortheactualmeasurement

readingwillappearredincolorandwillflash;thebeeperwillalsosound. Notethatinthe

Moisture‐onlymode,thebargraphturnsredwhentheAlarmthresholdisexceeded.

RefertotheexamplescreensinFig.5‐1andFig.5‐2.

8. ToswitchthealarmOFF,presstheSelectbuttonandthenselectSETTINGSfromthe

MainMenu