Instructions

FLIR MR176 USER MANUAL Document Identifier: MR176-en-US_AB

6. Maintenance

6.1 Cleaning

Clean the meter with a damp cloth and mild detergent; do not use abrasives or solvents.

6.2 Battery Charging

1. The internal battery is not user serviceable.

2. Please charge the battery before first use.

3. Connect the meter to an AC source or a computer USB port using the supplied USB

charger cable. The USB port is located on the bottom of the meter, under the protective

flap, next to the EXT Probe jack.

4. While the meter is charging, a blue LED (bottom of meter under protective flap) indicates

that charging is successfully taking place.

5. View the battery status icon on the upper left hand corner of the meter’s display when a

program menu is active.

6.2.1 Disposal of Electronic Waste

As with most electronic products, this equipment must be disposed of in an environmentally

friendly way, and in accordance with existing regulations for electronic waste.

Please contact your local FLIR Systems representative for more details.