Data Sheet
Table Of Contents
- 1 Advisories
- 2 Introduction
- 3 Safety
- 4 Descriptions
- 5 User Interface Menus
- 6 Powering the MR277
- 7 Moisture Measurement Operation
- 8 Thermal and Visible Camera Operation
- 9 Ambient Temperature and Humidity Measurements
- 10 Capturing and Working with Screen Captures
- 11 Bluetooth® Communication and FLIR Tools™
- 12 Field Firmware Updates
- 13 Maintenance
- 14 Specifications
- 15 Appendices
- 16 Limited 10–Year Warranty
- 17 Customer Support
Descriptions
4
4.2 Control Button Descriptions
Long press to power ON or OFF.
Return button. Short press to back out to previous screen in Menu
system.
Long press to switch Worklight ON or OFF.
Press the Select button (center) to access the Main Menu and to select
items in the menu system.
Use the outer navigation (ring) buttons to move Up-Down-Left-Right.
Press to switch the Laser pointer ON.
Press to capture screen image.
Press to open image gallery.
4.3 Display Description
Figure 4.2 MR277 Select Display Descriptions
1. Moisture reading
2. Temperature of targeted center spot (cross hairs)
3. Air temperature (from probe measurement)
4. Relative humidity (from probe measurement)
5. Dew point temperature calculation
6. Vapor Pressure calculation in kilo-Pascals (kPa)
7. Mixing ratio calculation in grains per pound (GPP)
#NAS100005; r. AG/62027/62027; en-US
6