Data Sheet
Table Of Contents
- 1 Advisories
- 2 Introduction
- 3 Safety
- 4 Descriptions
- 5 User Interface Menus
- 6 Powering the MR277
- 7 Moisture Measurement Operation
- 8 Thermal and Visible Camera Operation
- 9 Ambient Temperature and Humidity Measurements
- 10 Capturing and Working with Screen Captures
- 11 Bluetooth® Communication and FLIR Tools™
- 12 Field Firmware Updates
- 13 Maintenance
- 14 Specifications
- 15 Appendices
- 16 Limited 10–Year Warranty
- 17 Customer Support
Moisture Measurement Operation
7
Figure 7.5 Psychrometrics display mode
• Moisture mode. This is a dedicated display for moisture only. Large digits
and a bar graph are used in this mode for easy viewing. Additional features
in this mode include color coded alarm alert (see Section 7.9 High Mois-
ture Alarm) and relative readings (see Section 7.8 Set Reference).
Figure 7.6 Moisture-only display mode
7.3 IGM™ Moisture and IGM™ Custom Modes
In the IGM™ Moisture mode
you can view a camera image with the
Moisture reading appearing on the upper left. Select this mode in the menu
(Measurement/IGM™ Moisture). IGM™ stands for ‘Infrared Guided Measure-
ments’. The Pin or Pinless display icon will appear next to the reading. To take
full advantage of this feature, scan for temperature variations, and use this
feedback to help you find areas of high moisture. For additional information
see Section 5.5 Measurement modes.
#NAS100005; r. AG/62027/62027; en-US
27