Data Sheet
Table Of Contents
- 1 Advisories
- 2 Introduction
- 3 Safety
- 4 Descriptions
- 5 User Interface Menus
- 6 Powering the MR277
- 7 Moisture Measurement Operation
- 8 Thermal and Visible Camera Operation
- 9 Ambient Temperature and Humidity Measurements
- 10 Capturing and Working with Screen Captures
- 11 Bluetooth® Communication and FLIR Tools™
- 12 Field Firmware Updates
- 13 Maintenance
- 14 Specifications
- 15 Appendices
- 16 Limited 10–Year Warranty
- 17 Customer Support
Moisture Measurement Operation
7
selection (Moisture Mode/Material
). Use the Navigation arrows to
scroll through the Material list and press Select
to choose the Group
number. See the Material Group tables in Section 15 Appendices, these
tables will help you decide which Material Group to select.
Figure 7.9 Selecting a Material Group in the ‘Moisture’ menu
• Pin Mode
PIN mode must be selected in the menu (Moisture mode
) when an
external pin-based probe is used. Note the pin icon on the upper left of the
main display when selected. Pin-based readings are represented in %MC
(moisture content) for wood and %WME (wood moisture equivalent) for
materials other than wood.
Figure 7.10 Pin mode menu selection
• Pinless Mode
#NAS100005; r. AG/62027/62027; en-US
29